• <wbr id="ewob4"></wbr>

        1. <output id="ewob4"></output>

          1. 產品-標準編號

            當前位置:首頁>產品-標準編號

            BS EN 1730:2012 Furniture-Tables-Test methods for the determination of stability, strength and durab

            時間:2020-10-21   訪問量:1631
            BS EN 1730:2012 Furniture-Tables-Test methods for the determination of stability,strength and durability
            Edition: 20200206 更新 
            SectionSection DescriptionSummary of important content重要內容摘要
            NAForeword1. All test methods for seating used in European Standards for furniture have been collated in one document. The document now contains methods that were previously listed in EN 581-3, Outdoor furniture, EN 527-3, Office Work Tables and Desks and EN 15372, Non-domestic tables.
            2. A durability test for tables with castors has been added.
            3. A durability test for height adjustment mechanisms has been added.
            1. 本標準匯集了歐洲家具標準中使用的所有座椅測試方法。該文件現在包含了之前在EN 581-3(戶外家具)、EN 527-3(辦公室工作臺和桌子)、EN 15372(非住宅桌子)中列出的方法。
            2. 增加了帶有castors的桌子的耐久性測試。
            3. 增加了高度調節裝置的(桌子的)耐久性測試。
            1ScopeNA 
            2Normative referencesNA 
            3Terms and definitionsNA 
            4General test conditions1. The test for deflection of table tops (see 6.7), except those made from metal, glass and stone, shall be carried out at a relative humidity of (50 ± 5) % and a temperature of (23 ± 2)° C.
            2. Unless otherwise stated, static forces shall be maintained for (10±2) s.
            3. Unless otherwise stated, durability forces shall be maintained for(2±1)s;
            1.除金屬、玻璃和石頭制成的臺面外,對臺面不平整度的測試(見6.7)應在相對濕度(50±5)%和溫度(23±2)度的情況下進行。
            2.除非另有說明,(強度測試時)靜載力應維持(10±2)秒。
            3.除非另有規定,耐久測試時,加載力應維持(2±1)秒。
            5Test Equipment and Apparatus1. The equipment shall not inhibit deformation nor cause unnatural deformation of the unit/component, i.e. it shall be able to move so that it can follow the deformation of the unit/component during testing.
            2. With the exception of the horizontal static, durability and stiffness tests, described in 6.2 and 6.4, all loading pads shall be capable of pivoting in relation to the direction of the applied force and the pivot point shall be as close as practically possible to the load surface.
            3. Loading pads for the horizontal static, durability and stiffness tests, described in 6.2 and 6.4, shall not pivot.
            4. With the exception of the horizontal static, durability and stiffness tests described in 6.2 and 6.4, if a loading pad tends to slide,use a slip resistant material between the loading pad and the surface being tested.
            1. 測試設備不應抑制(被測試的樣品)變形,也不應造成被測試的樣品的非自然變形,即在測試過程中,設備應能夠移動,以便跟蹤被測試的樣品的變形。
            2. 除了6.2和6.4中所述的水平靜載力、耐久性和強度測試外,所有的加載墊都應能夠(在)相對于所施加的力的方向活動,且連接點應盡可能接近加載面。
            3. 6.2和6.4中描述的用于水平靜態、耐久性和強度測試的加載墊不得活動。
            4. 除了6.2和6.4中描述的水平靜態、耐久性和強度測試外,如果加載墊有滑動的傾向,可以在加載墊和被測試表面之間墊襯防滑材料。
            SectionSection Description章節內容KW ModelKW Model Desc 產品名稱產品圖片資料下載操作視頻
            5Test Equipment and Apparatus (桌子)測試設備及儀器
            5.1Vertical impactor(桌面)垂直沖擊測試器KW-BSE-11-BSSeating Impacter歐標坐具沖擊器

             
            5.2Floor(桌子)測試平臺KW-BSE-29Rubber Sheet for Furniture Drop Test歐標跌落測試地板 

             
            5.3Stops(桌子)測試阻擋塊KW-BSE-02Stopper擋塊(厚度小于12毫米)

             
            5.4Loading pad(桌子)加載墊KW-BSE-04-SPLocal Loading Pad - Universal普通加載墊-萬向(加彈簧)

             
            KW-BSE-04-NSLocal Loading Pad - fixed普通加載墊-非活動關節

              
            5.5Foam家具加載墊襯海綿KW-BSE-08-2525mm PU Foam for Use with Seat Loading Pads25毫米坐具測試加載海綿襯墊

             
            5.6Steel test tube(桌子)穩定性測試鋼管KW-BSE-47Steel Tube for table stablity test桌子穩定性試驗鋼管


             
            5.7Test    surface for castor durability tests(桌子)腳輪耐久測試平臺///   
            5.8Obstacles for castor durability tests(桌子)腳輪測試障礙物KW-BFM-17-FX-02Obstacles for EN caster testing歐標腳輪障礙物   
            6Test Procedures - Strength and durability 測試程序 -(桌子的)結構強度和耐久性測試
            6.2Horizontal static load    test(桌子)水平靜載強度測試KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            KW-BSE-67loading pad for EN table top static testing 歐標座面配重加載墊   
            6.3Vertical static load tests(桌子)垂直靜載強度測試KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            6.4Horizontal durability and stiffness test(桌子)水平搖晃耐久測試KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            KW-BSE-67loading pad for EN table top static testing 歐標座面配重加載墊   
            6.5Vertical durability test(桌面)垂直加載耐久測試KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            KW-BSE-67loading pad for EN table top static testing 歐標座面配重加載墊   
            6.6Vertical impact test(桌面)垂直沖擊測試KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            6.7Deflection of table tops(靜載狀態下的)桌面表面變形量KW-BFM-04Standard sand bag標準重量砂袋

             
            KW-GBF-08 平整度測定儀   
            6.8Durability of tables with castors帶腳輪的桌子的耐久測試NO 定制產品   
            6.9Drop test桌面跌落測試KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            KW-BSE-29Rubber Sheet for Furniture Drop Test歐標跌落測試地板    
            7Test procedures – Stability 測試程序 - 穩定性
            7.1GeneralNA///   
            7.2Stability under vertical load 垂直載荷下穩定性測試///   
            7.2.1General一般要求///   
            7.2.2Test for tables that are or can be set to a height of 950 mm or less桌面高度小于或等于950毫米的桌子測試KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            7.2.3Test for tables that are or can be set to a height greater than 950 mm桌面高度大于950毫米的桌子測試KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            7.3Stability for tables with extension elements具有抽拉構件的桌子的穩定性KW-BSE-17Universal test rig for EN furniture
            多功能家具綜合框架試驗機

             
            KW-BFM-04 Standard sand bag標準重量砂袋

             
            7.4Stability of tables designed to support a parasol用來撐傘的桌子的穩定性KW-BSE-47Steel Tube for table stablity test桌子穩定性試驗鋼管

             
            8Test procedures - Height adjustment mechanisms 測試程序 - 機械調節桌面高度的桌子
            8.1General一般要求///   
            8.2Durability of Height adjustment mechanisms桌面高度可調的機械耐久性測試KW-BFM-04 Standard sand bag標準重量砂袋

             

            上一篇:UL - 4041 Outline of Investigation for Outdoor Furniture

            下一篇:GB/T 29525-2013 座椅升降氣彈簧 技術條件

            發表評論:

            評論記錄:

            未查詢到任何數據!

            在線咨詢

            點擊這里給我發消息 售前咨詢專員

            點擊這里給我發消息 售后服務專員

            在線咨詢

            免費通話

            24小時免費咨詢

            請輸入您的聯系電話,座機請加區號

            免費通話

            微信掃一掃

            微信聯系
            返回頂部
            台湾娱乐中文网2244,狠狠狠的在啪线香蕉www,亚洲不卡AV不卡一区二区,最新2019高清视频456香蕉,免费2020国产一级A片,欧美v日韩v亚洲直播在线观看,日本一高清二区视频久二区…,2021久久最新国产精品,赤裸人妻撅起肥白大屁股,亚洲精品2012中文字幕在线看 yw中文日韩欧美在线一区 2021午夜福利理论片 俄罗斯美女性色a大片免费 亚洲欧美AⅤ不卡在线观看